5X80 Series Software Development Kit (SDK) User’s Guide
3 - 1
3
Enumerated Types and Definitions
Error Codes
RESULT_INTIALIZE = -1
Initial error code value.
RESULT_SUCCESS = 0
Operation was successful.
RESULT_EOT = 256
Undefined error.
RESULT_ERR_BADFILENAME
Bad file name.
RESULT_ERR_BADINTELIMAGE
Part of image window outside barcode image boundaries.
RESULT_ERR_BADPORT
Invalid connection specified.
RESULT_ERR_BADREGION
Invalid image window.
RESULT_ERR_BADSMARTIMAGE
The device did not capture a valid image for intelligent imaging.
RESULT_ERR_BAUD_TOO_HIGH
Requested baud rate not supported by host port.
RESULT_ERR_BUFFER_TOO_SMALL
Buffer passed in to small for output.
RESULT_ERR_CAPTURE_IMAGE_FAILED
Imager failed to capture the image.
RESULT_ERR_COMPRESSION_FAILED
Error compressing image data.
RESULT_ERR_CONNECT_BOOT_CODE
Imager connected but is running in boot code.
RESULT_ERR_DECOMPRESSION_FAILED
Error decompressing image data.
RESULT_ERR_DLL_FILE
Dll file specified to SetHardwareDllFileName not found.
RESULT_ERR_DRIVER
Communication error/no response.
RESULT_ERR_ENGINEBUSY
The scan engine temporarily busy.
RESULT_ERR_FILE
Error occurred during a file operation.
RESULT_ERR_FILEINCOMPATIBLE
The selected file is incompatible with the imager.
RESULT_ERR_FILEINVALID
The selected file is invalid or corrupt.
RESULT_ERR_INTERNAL_ERROR
Generic internal failure.
RESULT_ERR_INVALID_COMM_PARAMS
Invalid RS-232 parameters specified.
RESULT_ERR_MEMORY
Out of memory/memory allocation failed.
RESULT_ERR_MENUDECODE
Symbol decoded is a menu symbol.
RESULT_ERR_NAK
Received a NAK on response.
RESULT_ERR_NODECODE
No decode: timed out or no more trigger.
RESULT_ERR_NODRIVER
Communication initialization failed.
RESULT_ERR_NOIMAGE
hhpGetLastImage
called but no image available.
RESULT_ERR_NOINTELBARCODE
No decode during intelligent image capture.
RESULT_ERR_NOINTELIMAGE
Error on retrieve intelligent image from imager.
RESULT_ERR_NORESPONSE
Imager did not acknowledge request.
RESULT_ERR_NOTCONNECTED
Imager not yet connected.
RESULT_ERR_NOTRIGGER
During wait for decode, checks that trigger return is released.
RESULT_ERR_PARAMETER
One of the function parameters was invalid.
RESULT_ERR_POLLEVENT
Error configuring transfer thread.
RESULT_ERR_READTHREAD_START
Error starting asynchronous transfer thread.
RESULT_ERR_READTHREAD_STOP
Error stopping asynchronous transfer thread.
RESULT_ERR_REFLASH
Engine firmware is corrupt.
Summary of Contents for 5080
