![background image](http://html1.mh-extra.com/html/hand-held-products/5080/5080_user-manual_589690012.webp)
1 - 6
5X80 Series Software Development Kit (SDK) User’s Guide
SDK Enumerated Types
Beep Options
Enumeration (not an enumerated type) that can be used with an
hhpSendActionCommand
.
Compression_t
Enumerated type for specifying the form of compression (if any) to use when transferring an
image from the imager to the SDK. See
Compression Mode Formats
on page 3-4.
ConfigItems_t
Enumerated type to specify that the configuration structure is being sent to the Read/Write
config item functions.
DECODE_METHOD
Enumerated type of decode methods available to decode symbols.
DECODER_TYPE
Enumeration of types of decoders and, by extension, what symbologies can be decoded.
EngineType_t
Describes the connection, the imager, and the type of engine.
FileFormat_t
Enumerated type for specifying the format of the data returned in the HHP_IMAGE structure.
HP_ACTION
Enumerated type whose items describe which imager command functionality (beeper,
aimers, lights) is to be acted upon.
HHP_AIMER_MODES
Enumerated type to specify the aimer mode.
HHP_AUTOEXPOSURE
Enumerated type to specify whether the imager tries to auto adjust the image exposure and, if
so, how.
HHP_BAUD_RATE
Enumerated type of the supported baud rates for serial devices.
Note: A special driver is required if a baud rate greater than 115200 is selected.
HHP_BEEPER_VOLUME
Enumerated type to select the imager beeper volume when sounding the beeper. This structure
is ignored for products that do not have a beeper.
HHP_CONNECT_TYPE
Enumerated type used in
hhpConnect
to specify the connection type and connection port where
the imager is connected.
HHP_DATA_BITS
Enumerated type for number of serial data bits.
HHP_DUTY_CYCLE
Enumerated type to specify the behavior of the illumination and aimer LEDs during image
capture.
HHP_EVENT_TYPE
Enumerated type that describes the type of asynchronous event being reported.
HHP_FRAME_RATE
Enumerated type to select the image capture frame rate. Only valid when no auto exposure is
selected.
HHP_GAIN
Enumerated type to select the image capture gain. This type is only valid when no auto
exposure is selected.
HHP_PARITY
Enumerated type for serial parity.
HHP_SEQ_MODES
Enumerated type to specify the sequence acquisition mode.
HHP_STOP_BITS
Enumerated type for number of serial stop bits.
HHP_SYS_SPEED
Enumerated type to specify the rate (in Mhz) at which all components other than the CPU are
to be clocked.
HHP_TRIG_MODES
Enumerated type to specify the trigger mode.
OCRDirection_t
Enumerated type for setting the text direction for OCR decoding.
OCRMode_t
Enumerated type for setting the font for OCR symbology decoding.
On Off
Enumeration (not an enumerated type) that can be used with hhpSendActionCommand.
Result_t
Enumerates the function result codes returned by the SDK functions. See
Error Codes
on page
3-1.
SetupType_t
Enumerated type for specifying whether a read configuration item call should return the current
settings or the imager default setting.
Symbology ID enumeration
Enumerates all the available symbologies supported in the imager decoder. Non-data type
used in the symbology configuration functions.
Windows Data Types (Continued)
Summary of Contents for 5080
