Hanbit Electronics Co.,Ltd. All rights reserved
Rev.5.0, 2003-09-03 Page 5/5 www.hbe.co.kr
To confirm whether the device is installed properly, choose
“
Start-> Settings->
Control Panel-> System-> Hardware
”
,
then double-click on the device manager
to display the [Universal Serial Bus] icon.
Double-click that icon to see if the
“
USB
mass storage device
”
is installed.
It is recommended to use
USB2.0 XDRUM N Stick
compatibly with
“
Hi-Speed
USB 2.0
”
. If you connect the
USB2.0 XDRUM N Stick to a
“
non Hi-Speed USB 2.0 Hub
”
, Windows will display a warning message as
shown below. You may use the device without changing any settings, but
reading/writing speed will slow down.
Remove the USB2.0 XDRUM
N
Stick
In order to remove the device safely,
double-click the [safe hardware removal]
icon, remove device, then choose
“
Stop->
OK-> OK-> Close
”
.