Learn the proper way to use the card reader before using the product.
If a card is inappropriately recognized, the red light will blink with a sound indicating error.
■ Proper Way to Use Card Reader
1
2
3
① Hold up your credit card as shown in the illustration.
※ Face the magnetic side of the card outwards.
② Place your credit card inside the slot of the card reader.
③ Slide down your credit card gently in the direction of the arrow.
① Click Start→All Programs→eGalaxTouch→Configure Utility
② Click the 'Tools' tab, then ‘4 Points Calibration’
③ The touch screen input points are calibrated.
■ Touch Screen Calibration
When using the touch screen for the first time or if the pointer does not precisely match your touch, calibrate the touch screen
using the ‘eGalaxTouch’ tool. Depending on the operating system, the calibration process may vary and may not be available in
some operating systems.
Do not apply severe impact to the touch screen. Avoid sharp objects such as ball-point pen when pressing the screen.
This may damage your touch screen.
