HAMWORTHY HEATING LTD Page 500005151/B
3
2.1.6 Ensure all pipe work and connectors are fully
secured before moving the pipe work towards the boiler.
Ensure the feet are located in the correct position and
they are adjustable. It is recommended if there is enough
room available to move the pipe work while still attached
to the pallet; for ease of adjustment of the pipe works
feet and to protect pipe work from damage.
2.1.7 Using a suitably rated hoist, raise the assembly to
approximate finished height, gently lower the hoist until
the feet touch the floor, adjust the feet (using the hoist to
take the weight) till the flexible hose mounting points are
aligned with the flow and return points on the boiler.
2.1.8 Keeping assembly safely balanced on the hoist,
adjust all pipes into the adaptors ±5mm until a
satisfactorily level assembly has been achieved,
then
remove the red caps & secure all adaptors
.
Note: DO NOT overtighten the adaptors as this may
damage the seals.
2.1.9 Remove the pallet
(if used)
2.1.10 Release the hoist and remove.
Remove Red Caps
