Assembly — Installing the Light Kit
13
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
12
Attaching the switch housing
to the mounting ring
13
□
Remove one of the three switch housing mount
screws (II) from the mounting ring (WW) and loosen
the other two screws (II). (Do not remove.)
□
While holding the switch housing (J) under the fan
motor assembly (F), snap together the wire connec-
tion plugs (XX).
□
Place the key holes in the switch housing (J) over the
two screws (II) previously loosened from the
mounting ring (WW). Turn the switch housing (J) until
the switch housing (J) locks in place at the narrow
section of the key holes. Secure by tightening the two
mounting plate screws (II) previously loosened and
the one (II) previously removed.
Attaching the light kit to
the switch housing
□
Remove one of the three light kit mounting screws
(JJ) from the switch housing (J) and loosen the other
two screws (JJ). (Do not remove.)
□
While holding the light kit (K) under the fan motor
assembly (F), snap together the two wire plugs (YY):
- White to white
- Black to blue
□
Place the key holes in the light kit (K) over the two
screws (JJ) previously loosened from the switch
housing (J). Turn the light kit (K) until the light kit (K)
locks in place at the narrow section of the key holes.
Secure by tightening the two light kit mounting
screws (JJ) previously loosened and the one (JJ)
previously removed.
J
WW
II
XX
J
F
JJ
YY
K
CAUTION:
Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
