11
Installing the water lines
Assembly — Attaching the Misting Device
□
Remove but do not discard the fixed secure rings (GGG) from the two-way connector (FF).
□
Attach the water lines (UU) and (EE) to the two-way connector (FF) by pushing them securely into the openings until they
stop. Reinstall the fixed secure ring (GGG).
□
Straighten the water lines (UU and EE) and secure to ceiling with tube clips (HH) and tube clip mounting screws and anchors
(JJ and II).
□
If removal of the water lines from a two-way connector is required for any reason, depress the rings (FFF). While pulling out
the tubes, do not pull out tubes without depressing rings as this can cause damage to the connector.
Before starting installation, disconnect the power by turning off the circuit breaker or removing the fuse at the fuse box. Turning
power off using the fan switch is not sufficient to prevent electric shock.
CAUTION:
UU
EE
GGG
UU
FFF
FF
FFF
II
HH
EE
JJ
16
