10
Attaching the Mounting
Plate
Remove 1 of the 3 screws from the mounting
ring and loosen the other 2 screws. (Do not
remove)
Place the key holes on the mounting plate over
the 2 screws previously loosened from the
mounting ring, turn mounting plate until it
locks in place at the narrow section of the key
holes. Secure by tightening the 2 screws
previously loosened and the one previously
removed. (Fig. 18)
1.
2.
Remove 1 of the 3 screws from the mounting
plate and keep it for future use. Loosen the
other 2 screws. (Do not remove)
While holding the light kit assembly under
your fan, make the polarized plug connections:
(Figure 19)
- White to white
- Black to black
Place the key holes on the light kit over the 2
screws previously loosened from the mounting
plate, turn light kit until it locks in place at the
narrow section of the key holes. Secure by
tightening the 2 screws previously loosened
and the one previously removed. (Fig. 19)
1.
2.
3.
Mounting Plate
Light Kit
Wire Connection
Plugs
Screws
Figure 18
Mounting Plate
Mounting Ring
Screws
Installing the
Light Kit
Figure 19
NOTE
FAILURE BEFORE STARTING INSTALLATION,
DISCONNECT THE POWER BY TURNING OFF THE
CIRCUIT BREAKER OR REMOVING THE FUSE AT
FUSE BOX. TURNING POWER OFF USING THE FAN
SWITCH IS NOT SUFFICIENT TO PREVENT
ELECTRIC SHOCK.
