background image

740-125

792145350828

Hampton Bay Lifetime Limited Warranty

The  retailer  warrants  the  fan  motor  to  be  free  from  defects  in  workmanship  and  material 
present at time of shipment from the factory for a lifetime after the date of purchase by the 
original purchaser.  The retailer also warrants that all other fan parts, excluding any glass or 
plexiglass  blades,  to  be  free  from  defects  in  workmanship  and  material  at  the  time  of 
shipment from the factory for a period of one year after the date of purchase by the original 
purchaser.  We agree to correct such defects without charge or at our option replace with a 
comparable or superior model if the product is returned to the retailer. To obtain warranty 
service, you must present a copy of the receipt as proof of purchase. All costs of removing 
and reinstalling the product are your responsibility.  Damage to any part such as by accident 
or  misuse  or  improper  installation  or  by  affixing  any  accessories,  is  not  covered  by  this 
warranty.    Because  of  varying  climatic  conditions  in  the  United  States  this  warranty  does 
not  cover  any  changes  in  brass  finish,  including  rusting,  pitting,  corroding,  tarnishing  or 
peeling.    Brass  finishes  of  this  type  give  their  longest  useful  life  when  protected  from 
varying  weather  conditions.    A  certain  amount  of  wobble  is  normal  and  should  not  be 
considered a defect. Servicing performed by unauthorized persons shall render the warranty 
invalid.  There  is  no  other  express  warranty.  The  retailer  hereby  disclaims  any  and  all 
warranties,  including  but  not  limited  to.    Those  of  merchantability  and  fitness  for  a 
particular  purpose  to  the  extent  permitted  by  law.    The  duration  of  any  implied  warranty 
which  cannot  be  disclaimed  is  limited  to  the  time  period  as  specified  in  the  express 
warranty.  Some states do not allow limitation on how long an implied warranty lasts, so the 
above  limitation  may  not  apply  to  you.    The  retailer  shall  not  be  liable  for  incidental, 
consequential,  or  special  damages  arising  out  of  or  in  connection  with  product  use  or 
performance  except  as  may  otherwise  be  accorded  by  law.  Some  states  do  not  allow  the 
exclusion of incidental or consequential damages, so the above exclusion or limitation may 
not  apply  to  you.    This  warranty  gives  specific  legal  rights,  and  you  may  also  have  other 
rights which vary from state to state.  This warranty supersedes all prior warranties.

Lifetime Limited Warranty

Date Purchased  

Store Purchased

Model No.

Serial No.
 
Vendor No.

UPC

11289

Summary of Contents for Redington 740-125

















Reviews: