Assembly
Attaching the table legs to the
table rim
1
Attaching the woven panels to
the table legs
2
5
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Remove the ceramic tile and set aside in a safe place until
the table has been completely assembled.
Turn the table rim (A) upside down.
Attach the table legs (B) to the table rim (A) by inserting
bolts (AA) with metal washers (CC) through the pre-drilled
holes in the table legs and rim (A).
Attach the woven panels (C) to the table legs (B) by inserting
bolts (BB) with metal washers (CC) through each
pre-drilled hole on the woven panel (C) and table leg (B).
AA
CC
B
A
B
IMPORTANT:
Do not tighten completely until
assembly is completed.
C
CC BB
B
A
IMPORTANT:
Each of the four leg bolts should be attached
and initially tightened only a few revolutions. Then tighten
further, one at a time, alternating between the four legs.
Do NOT fully tighten one leg before you attach the other legs.