HAMPTON BAY Northport 178-047 Owner'S Manual Download Page 9

6

blue wire will be on the other side, and push 
carefully up into the outlet box.

Connect the ground conductor of the 120V 
supply (this may be a bare wire or a wire with 
green colored insulation) to the green ground 
lead(s) of the fan (Figure 12).

Connect the fan motor white wire to the supply 
white (neutral) wire using a wire nut. (Figure 
12)

Connect the fan motor black wire to the supply 
black (hot) wire using a wire nut (Figure 12).

Connect the blue wire for light kit to the black 
household supply wire.

Turn wire nut connections upward, spreading 
them apart so the green (ground) will be on one 
side of the outlet box and the white, black and 

1.

2.

3.

4.

5.

Making the Electrical

Connections

REMEMBER

 to disconnect the power.

If you feel you do not have enough electrical 
wiring knowledge or experience, have your fan 
installed by a licensed electrician.

Follow the steps below to connect the fan to your 
household wiring. Use the wire nuts supplied with 
your fan. Secure the wire nuts with electrical tape. 
Make sure there are no loose strands or 
connections.

WARNING

CHECK TO SEE THAT ALL CONNECTIONS ARE 

TIGHT, INCLUDING GROUND, AND THAT NO 

BARE WIRE IS VISIBLE AT THE WIRE NUTS. 

EXCEPT FOR THE GROUND WIRE.  

ELECTRICAL DIAGRAMS ARE FOR 

REFERENCE ONLY. OPTIONAL USE OF ANY 

LIGHT KIT SHALL BE UL LISTED AND 

MARKED SUITABLE FOR USE WITH THIS FAN.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC 

SHOCK. DO NOT USE THIS FAN WITH ANY 

SOLID-STATE SPEED CONTROL DEVICE.

WARNING

SUPPLY CIRCUIT

Figure 12

BLACK

WHITE

BLACK

WHITE

BLUE

GREEN

Outlet Box

Ground

Conductor

Green

Ground

Lead

Ground to

Downrod

Summary of Contents for Northport 178-047

















Reviews: