10
Assembly - Hanging the Fan (continued)
Making the electrical connections
3
IMPORTANT:
Use the plastic wire connectors (BB) supplied
with your fan. Secure the connectors with electrical tape and
ensure there are no loose strands or connections.
WARNING:
Each wire nut supplied with this fan is designed
to accept up to one 12-gauge house wire and two wires
from the fan. If you have larger than 12-gauge house wiring
or more than one house wire to connect to the fan wiring,
consult an electrician for the proper size wire nuts to use.
☐
Please refer to the Smart Universal Remote
Control installation instructions at the
beginning of this document
NOTE:
The fan comes with 54 in. lead wires for use with
an extended ball/downrod assembly. If using the 6 in. ball/
downrod assembly (B) provided, you can cut the lead wires to
your desired length (no shorter than 12 in.).
WARNING:
Remove the rubber motor stops on the bottom
of the fan before installing the blades or testing the
motor.
4
Wrapping the extra wire
NOTE:
Follow this step ONLY if you did not cut the extra length
from the wires coming from the ceiling fan.
☐
Gently wrap the excess wire around the mounting bracket (A).
☐
Secure the wires with electrical tape.
