8
Installation
• Out of direct sunlight
• Not susceptible to moisture
• Away from uninsulated outside wall
The stove should be located in an area:
Assembly Instructions
1. Lay stove (A) upside down on a padded surface with the underside accessible. Attach leg (B) to stove by inserting the tab on the top of the
leg (B) into the corresponding slot on the bottom of the stove (A). Insert two screws (C) into predrilled holes and tighten securely.
Repeat with remaining three legs.
2. Carefully position stove against wall.
3. Plug the power cord into the 15-amp, 120-volt outlet. Use an extension cord rated for a minimum of 1,875 watts if necessary.
CAUTION:
Make sure that the unit is installed so that the power cord is not compressed against or caught on the stove and
that it has an unobstructed path to the grounded outlet.
WARNING
• Stove is heavy and should be assembled near its desired
location.
• It is recommended that two people move the assembled
stove to prevent injury.
WARNING
Do not install unit on shelves, raised platforms, beds, blankets, pillows etc. Keep combustible materials such as furniture,
bedding, papers, clothes and curtains at least 3 feet (914 mm) from the stove.
CLEARANCE TO COMBUSTIBLES
Sides
4 in. (101.6 mm)
Floor
0 in. (0 mm)
Top
36 in. (914 mm)
Front
36 in. (914 mm)
Rear
0 in. (0 mm)
A
Summary of Contents for Legacy EST-340-10
Page 14: ...14...
