6
Installation - New Construction with Flex Bracket
CAUTION:
Make sure power is switched off at
service panel before starting installation.
Wear gloves during installing to help protect your
hands from injury.
NOTE:
Ceiling mount only.
1
Install the flex bracket
Insert short flex bracket (C) to fan housing(A) (air outlet side),
then fix short screw(F) onto it.
On the opposite side of the housing, align the long flex bracket
(D) and short flex bracket (C) and fix with short screws (F).
Extend both brackets.
2
Install the fan housing onto transom
Secure short flex bracket (C) on air outlet side to the
transom using long screw (E).
Then secure short flex bracket (C) on opposite side to
transom using long screw (E).
Adjust long flex bracket (D) position based on the distance
of two transoms, fix long flex bracket(D) onto transom by
long screw (E).
Use short screws (F) to lock the flex brackets in place.
Please remove the tape, which protects
the damper during shipping and
installation, from the duct adaptor as
shown below.
IMPORTANT:
F
C
D
C
F
E
E
F
F
①
③
④
②
transom
transom
