background image

Troubleshooting

Warranty

Problem

Possible Cause

Solution

The lights do not turn on.

There is no power.

There is a disconnection or break in the wire.

The transformer setting is incorrect.

Check the outlet and ensure that a breaker or GFCI circuit has not been 

tripped.

back to the transformer.

Check the settings on the transformer.

Tighten the wire connector and ensure the metal contacts pierce the 

insulation on the low voltage cable from the transformer.

There is a loose connection at the transformer.

Unplug the transformer from the outlet and visually inspect the positive and 

negative connecting posts. Each wire should be securely screwed in and 

not in contact with any other.

WHAT IS COVERED

applies only to the original consumer and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only 
obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged 

WHAT IS NOT COVERED

This warranty shall not apply to any product that is found to have been improperly installed, set up or used in any way not in accordance with the instructions 
supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration or faulty installation,
or any failure not relating to faulty material or workmanship. The warranty shall not apply to the finish on any portion of the product, such as surface and/or 
weathering, as this is considered normal wear and tear.

limited to any labor/expense cost involved in the replacement or repair of said product.

Contact the Customer Service team at 1-855-HD-HAMPTON or visit www.HamptonBay.com

Cable Selection

12 VOLT TAP

Cable Length

Total Fixture Wattage

0-50 feet

51-100 feet

101-150 feet

0-60 Watts

16 AWG

16 AWG

14 AWG

61-120 Watts

16 AWG

14 AWG

12 AWG

121-180 Watts

14 AWG

12 AWG

NOT RECOMMENDED

181-240 Watts

14 AWG

12 AWG

NOT RECOMMENDED

241-300 Watts

12 AWG

NOT RECOMMENDED

NOT RECOMMENDED

600W Transformer = (2x300 Watts)

12 AWG

NOT RECOMMENDED

NOT RECOMMENDED

900W Transformer = (3x300 Watts)

12 AWG

NOT RECOMMENDED

NOT RECOMMENDED

15 VOLT TAP

Cable Length

Total Fixture Wattage

0-50 feet

51-100 feet

101-150 feet

0-60 Watts

16 AWG

16 AWG

16 AWG

61-120 Watts

16 AWG

16 AWG

12 AWG

121-180 Watts

14 AWG

14 AWG

12 AWG

181-240 Watts

14 AWG

14 AWG

12 AWG

241-300 Watts

12 AWG

12 AWG

NOT RECOMMENDED

600W Transformer = (2x300 Watts)

12 AWG

12 AWG

NOT RECOMMENDED

900W Transformer = (3x300 Watts)

12 AWG

12 AWG

NOT RECOMMENDED

Care & Cleaning

Follow the wires from the fixture and ensure a continuous connected path

There is a loose wire connector to the fixture.

The lights flicker.

The lights flicker (all

fixtures).

Clean the fixture with a soft dry cloth.
Do not use any cleaners with chemicals, solvents, or harsh abrasives.

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of five (5) years from date of purchase. This warranty

through misuse, abuse, accident, modifications, alterations, neglect or mishandling.

The manufacturer does not warrant and specifically disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty
contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Reviews: