5
Assembly
1
Connecting the Back and Arms
□
Align the holes in the sides of the back (B) to the matching
holes on the insides of the arms (A).
□
Connect the back (B) to the arms (A) by inserting an M6x10
bolt (AA) and M6 washer (CC) through each of the four
holes in the back (B).
□
Loosely tighten the bolts.
2
Attaching the Seat
□
P
lace the seat (C) between the two arms (A), so that the
holes in the seat align with the holes in each arm.
□
Connect the seat and arms by inserting the four M6x40
bolts (BB) through the arms (A) into the corners of the seat
(C) on the left and right sides.
□
Loosely tighten the bolts.
3
Tightening the Bolts
□
Make sure the bench stands straight and level with the
ground.
□
Tighten all of the bolts.
□
Cover all exposed bolt ends using the M6 caps (DD).
A
AA
B
CC
A
B
C
BB
DD
