Hampton HG35-1 Direct Vent Freestanding Gas Stove
25
INSTALLATION
Notch
Bracket
A)02-43
The bottom right edge of Log G)02-48 must sit snugly
against the bracket. (Front Log 02-45 has been removed
so that the bracket can be seen.)
Side View
G)02-48
E)02-45
F)02-47
12)
Position notch in Front Right Log G)02-48 on Log F)02-47 and push
the bottom right edge against the bracket on the burner tray.
G)02-48
13)
Test fi re to ensure proper light off (make sure fl ame fl ows smoothly
from one end of burner to the other. If there is any fl ame hesitation,
check that area for any blockage of the burner port.
Cutout
Pin
D)02-46
B)02-56
A)02-43
8)
Place the Left Top Log D)02-46 on the pin on Log B)02-56 and on
top of the cutout on Log A)02-43.
E)02-45
C)02-44
9)
Place Front Right Log E)02-45 on the two pins as shown.
10)
Place the lava rock in the area between the left and right logs, leaving
a space in the middle for log (F) 02-47.
Cutout
Notch
F)02-47
E)02-45
A)02-43
11)
Place the notch in Center Log F)02-47 over Log E)02-45 and across
the cutout on Log A)02-43.
