24
Hampton HG35-1 Direct Vent Freestanding Gas Stove
LOG SET
INSTALLATION
Read the instructions below carefully and refer to the diagrams. If
logs are broken do not use the unit until they are replaced. Broken
logs can interfere with the pilot operation.
The gas log kit contains the following:
a)
02-43 Rear
Log
902-227
b)
02-56 Middle Left Log
902-230
c)
02-44 Front Left Log
902-228
d)
02-46 Left
Top
Log
902-231
e)
02-45 Front Right Log
902-229
f)
02-47 Center
Log
902-232
g)
02-48 Middle Right Log
902-226
h)
Embers
902-151
i)
Lava
902-154
Embers
Embers
The "02" refer numbers (i.e. 02-43) are
molded into the rear of each log.
1)
Carefully remove the logs from the box and unwrap them. The logs
are fragile, handle with care -
do not force into position.
2)
Lift off the Cast Top and remove the glass front.
3)
Sprinkle the embers on the left and right sides of the fi rebox base.
A) 02-43
D) 02-46
G) 02-48
C) 02-44
B) 02-56
F) 02-47
E) 02-45
INSTALLATION
C)02-44
Pins on Rear Log Support
A)02-43
B)02-56
4)
Place Rear Log A)02-43 on the two pins on the rear log support.
5)
Place the Middle Left Log B)02-56 on the two pins as shown.
6)
Sprinkle some lava rock just in front of B) 02-56 on the burner holes.
Lava Rock
B)02-56
7)
Place Front Left Log C)02-44 onto the 2 front pins as shown.
