I
J
K
M
N
O
L
D
C
F
G
H
Assembly
4
□
□
□
Screw the upper pole (F) to bottom of the arm assembly (D).
Screw the middle pole (G) to bottom of the upper pole (F).
Screw the lower pole (H) to bottom of the middle pole (G).
□
□
Pull the excess power cord (L) through the base (K).
Insert the nipple (I) into the holes in the metal plate (J) and the
base (K), then secure with the metal washer (M), lock washer
(N) and nut (O) from bottom of the base (K) by using the
included wrench (P).
1
Assembling the poles
2
Assembling the poles to the base
NOTE:
Do not twist the power cord (L).
NOTE:
Make sure the socket (C) is opposite to the exit
of the power cord (L) as shown.
