Installation (continued)
6
Green ground screw
4
Making the electrical connections
□
□
□
□
□
□
□
* Use wire connectors (CC) to connect the wires.
Ground Wire:
Wrap the supply ground wire around the green ground screw on
the crossbar assembly (AA), no less than 2 in. from the end of the
wire. Tighten the ground screw.
Connect the fixture ground wire to the supply ground wire with a
wire connector (CC).
Supply Wire:
Connect the supply white wire to the white fixture supply wire
with a wire connector (CC).
Connect the supply black (or red) wire to the black fixture supply
wire with a wire connector (CC).
Wrap each connection with approved electrical tape and carefully
insert all of the connected wires into the outlet box.
□
□
5
Attaching the fixture body to the outlet
box
Reattach the backplate of the fixture body (D) to the crossbar
assembly (AA).
Secure with the previously removed lock ball (1).
6
Installing the light bulbs
□
Install the correct bulbs (not included) referring to fixture
markings and/or labels for maximum wattage.
AA
CC
AA
1
D
NOTE
: Uses two 60W Candelabra base bulbs or LED
equivalent (sold separately).
