6
Installation (continued)
6
Mounting the sensor in a wall
mounted mailbox
Use double-sided tape (CC) to mount the sensor (B).
Remove paper from both sides of the double-sided
tape (CC) and apply to a clean surface.
Ƒ
Open the lid of the mailbox.
Ƒ
Hold the sensor (B) with the screwdriver slot
pointing upward and the side button on the
right side of the sensor (B).
Ƒ
Apply the double-sided tape (CC) to the back of
the sensor (B) and mount on the inside of the
mailbox lid.
NOTE:
When installed correctly, the red LED on the sensor
will flash when the mailbox lid is opened.
7
Mounting the sensor in a post
mounted mailbox
Use double-sided tape (CC) to mount the sensor (B).
Remove paper from both sides of the double-sided
tape (CC) and apply to a clean surface.
Ƒ
Open the door of the mailbox.
Ƒ
Hold the sensor (B) with the screwdriver slot
pointing upward and the side button on the
right side of the sensor (B).
Ƒ
Apply the double-sided tape (CC) to the back of
the sensor (B) and mount on the inside of the
mailbox lid.
NOTE:
When installed correctly, the red LED on the sensor
will flash when the mailbox door is opened.
Operation
1
Adjusting the doorbell volume
The doorbell (A) has an adjustable volume control
located on the side. Rotate the thumbwheel up or
down to adjust the volume.
A
BB
BB
BB
