background image

Care and Cleaning

Troubleshooting 

17

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

     Check the support connections, brackets, and blade 

attachments twice a year. Make sure they are secure.  
Because of the fan’s natural movement, some 
connections may become loose over time. It is not 
necessary to remove the fan from the ceiling.

     Clean your fan periodically. Use only a soft brush or 

lint-free cloth to avoid scratching the finish. The plating is 
sealed with a lacquer to minimize discoloration or 
tarnishing.

     (Optional) Apply a light coat of furniture polish to the wood 

blades.

     (Optional) Cover small scratches with a light application of 

shoe polish.

Do

     Use water when cleaning. Water could damage the motor, 

or the wood, or possibly cause an electrical shock.

     Apply oil to your fan or motor. The motor has 

permanently-lubricated sealed ball bearings.

Do not

WARNING:

 Make sure the power is off at the electrical 

panel box before you attempt any repairs. Refer to the section 
“Making the Electrical Connections” on page 12.

Problem

Solution

Solution

     Check the main and branch circuit fuses or breakers.

     Check the line wire connections to the fan and switch wire connections in the switch housing.

     Make sure all motor housing screws are snug.

     Make sure the screws that attach the fan blade arm to the motor hub are tight.

     Make sure wire nut connections are not rattling against each other or the interior wall of the switch 

housing.

     Allow a 24-hour "breaking-in" period. Most noises associated with a new fan disappear during this 

time.

     If using the ceiling light kit, make sure the screws securing the glassware are tight. Check that the light 

bulb is also secure.

     Make sure there is a short distance from the ceiling to the canopy. It should not touch the ceiling.

     Make sure your ceiling box is secure and rubber isolator pads are used between the mounting bracket 

and outlet box.

The fan will not start.

The fan sounds noisy.

Summary of Contents for GLENDALE AG524-FB





















Reviews: