10
Installing the
Light Kit
Lossen the 3 screws from the light plate. (Do
not remove)
Raise and hold the light kit close to the light
plate and proceed to do the wire connections.
Connect the white wire connectors from the
light kit and fan, follow the same procedure
with the black wire connectors. (Fig. 18)
Tuck connections neatly into light plate, place
the light kit key holes over the 3 screws
previously loosened from the light plate, turn
light kit until it locks in place at the narrow
section of the key holes. Secure by tightening
the 3 screws previously loosened. (Fig. 18).
Install 2 x 13 Watt compact fluorescent bulbs
(included). (Fig. 18)
Place glass shade over the light kit and secure
it with the decorative cap and finial provided.
DO NOT OVER TIGHTEN
. (Fig. 18)
1.
2.
3.
4.
5.
NOTE
LIGHT BULBS HAVE NO WARRANTY; CAN BE
PURCHASED AT ANY HOME DEPOT STORE.
NOTE
BEFORE STARTING INSTALLATION, DISCON-
NECT THE POWER BY TURNING OFF THE
CIRCUIT BREAKER OR REMOVING THE FUSE
AT FUSE BOX. TURNING POWER OFF USING
THE FAN SWITCH IS NOT SUFFICIENT TO
PREVENT ELECTRIC SHOCK.
Figure 18
1.
2.
Install the mounting plate to the mounting ring
with 3 screws provided. (Fig. 19)
Place mounting plate cover over mounting
plate the and secure it with the decorative cap
and finial provided.
Fan without Light Kit
(Optional)
Figure 19
Screws
Finial
Decorative Cop
Mounting Plate
Mounting Plate
Cover
Mounting Ring
Screws
Bulbs
Light Kit
Glass Shade
Connection Plugs
Finial
Decorative Cap
Light Plate