10
Installing the Light Kit
While holding the light kit assembly under
your fan, snap together the wire connection
plugs.
Carefully push all wires back into the switch
housing, then install the light kit assembly onto
the mounting plate with 3 screws provided. Be
sure to tighten all screws. (Fig. 18)
Install 2 x 13 Watt compact fluorescent bulbs
(included).
NOTE:
CFL bulbs are
NOT
dimmable. (Fig. 18)
Place glass shade over the light kit and secure
it with the glass cap and decorative nut
provided.
DO NOT OVER TIGHTEN
. (Fig.
18)
Restore power and your light kit is ready for
operation.
1.
2.
3.
4.
5.
NOTE
LIGHT BULBS HAVE NO WARRANTY; CAN BE
PURCHASED AT ANY HOME DEPOT STORE.
NOTE
BEFORE STARTING INSTALLATION, DISCON-
NECT THE POWER BY TURNING OFF THE
CIRCUIT BREAKER OR REMOVING THE FUSE
AT FUSE BOX. TURNING POWER OFF USING
THE FAN SWITCH IS NOT SUFFICIENT TO
PREVENT ELECTRIC SHOCK.
1.
2.
3.
4.
Disassemble the switch housing from the light
kit assembly, you can keep it for future use.
Attach the plug to the switch housing. (Fig. 19)
Holding the switch housing under your fan,
snap together the wire connection plugs.
Install the switch housing to the mounting plate
with screws provided. (Fig. 19)
Fan without Light Kit
(Optional)
Figure 18
Glass Cap
Decorative Nut
Bulbs
Glass Shade
Screws
Light Kit
Assembly
Wire
Connection
Plugs
Mounting Plate
Wire Connection
Plugs
Switch
Housing
Plug
Screws
Figure 19
Summary of Contents for Carlsbad
Page 2: ...Carlsbad by Hampton Bay ...
