background image

14

The Hampton Bay warrants the fan motor to be free from defects in workmanship and material present at time 
of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. 
Hampton Bay also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from 
defects in workmanship and material at the time of shipment from the factory for a period of one year after the 
date of purchase by the original purchaser. We agree to correct such defects without charge or at our option 
replace with a comparable or superior model if the product is returned to Hampton Bay. To obtain warranty 
service, you must present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the 
product are your responsibility. Damage to any part such as by accident or misuse or improper installation or 
by affixing any accessories, is not covered by this warranty. Because of varying climatic conditions this 
warranty does not cover any changes in brass finish, including rusting, pitting, corroding, tarnishing or peeling. 
Brass finishes of this type give their longest useful life when protected from varying weather conditions. A 
certain amount of “wobble” is normal and should not be considered a defect. Servicing performed by 
unauthorized persons shall render the warranty invalid. There is no other express warranty. Hampton Bay 
hereby disclaims any and all warranties, including but not limited to. Those of merchantability and fitness for 
a particular purpose to the extent permitted by law. The duration of any implied warranty which cannot be 
disclaimed is limited to the time period as specified in the express warranty. Some states do not allow 
limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer 
shall not be liable for incidental, consequential, or special damages arising out of or in connection with product 
use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of 
incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty 
gives specific legal rights, and you may also have other rights which vary from state to state. This warranty 
supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty must 
be paid by the customer.

Lifetime Limited Warranty

(lifetime warranty on motor)

You must present a copy of the original 

purchase receipt to obtain warranty 

service.

For any additional information on your 

Hampton Bay Ceiling Fan, please write to: 

THE HAMPTON BAY FAN & 

LIGHTING CO. 

P. O. Box 395

Norco, CA 92860

Attach receipt here for easy 

location

Summary of Contents for Bercello Estates II


















Reviews: