8
Attaching the Fan Blades
Attach the fan blades to the blade holders using
the screws provided, tighten screws securely.
(Fig. 16)
Rotate motor so that the screw holes are
revealed through the opening on mounting
ring. Align motor holes to blade holders and
secure with screws provided, tighten screws
securely. (Fig. 16)
1.
2.
WARNING
TO REDUCE THE RISK OF PERSONAL INJURY,
DO NOT BEND THE BLADE HOLDERS WHILE
INSTALLING, BALANCING THE BLADES, OR
CLEANING THE FAN. DO NO INSERT FOREIGN
OBJECTS BETWEEN ROTATING FAN BLADES.
Blade Balancing
Check that all blade and blade holder screws
are secure.
Most fan wobble problems are caused when
blade levels are unequal. Check this level by
selecting a point on the ceiling above the tip of
one of the blades. Measure from a point on the
center of each blade to the point on the ceiling.
Measure this distance as shown in Figure 17.
Rotate the fan until the next blade is positioned
for measurement. Repeat for each blade.
Measurements deviation should be within 1/8˝.
Run the fan for 10 Minutes.
Use the enclosed Blade Balancing Kit if the
blade wobble is still noticeable.
1.
2.
3.
The following procedure should correct most fan
wobble. Check after each step.
Figure 17
Touching Ceiling
Screws
Blades
Blade Holders
Screws
Slot
Tab
Figure 16
Summary of Contents for Bercello Estates II
Page 1: ......
