9
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
XX
A
C
D
E
A
B
C
E
Assembly - Hanging the Fan
Attaching the fan to the electrical box
3
WARNING:
To reduce the risk of fire, electric shock or
personal injury, mount to outlet box marked “acceptable
for fan support of 35lbs. (15.9 Kg) or less” and use screws
provided with the outlet box.
WARNING:
To avoid possible electrical shock, turn the
electricity off at the main fuse box before wiring. If you
feel you do not have enough electrical wiring knowledge
or experience, contact a licensed electrician.
□
Pass the 120-Volt supply wires through the center hole in
the mounting bracket (A).
□
Install the ceiling mounting bracket (A) on the outlet box (NN)
by sliding the mounting bracket (A) over the two screws (JJ)
provided with the outlet box (NN). If necessary, use leveling
washers (not included) between the mounting bracket (A) and
the outlet box (NN). Note that the flat side of the mounting
bracket (A) is toward the outlet box (NN). When using close-
to-ceiling mounting, it is important that the mounting bracket
(A) be level.
□
Securely tighten the two mounting screws (JJ).
Hanging the fan
□
Carefully lift the fan motor assembly (E) up to the
mounting bracket (A).
□
Seat the hanger ball portion of the ball/downrod as-
sembly (B) in the mounting bracket socket. Ensure
that the tab on the mounting bracket (A) socket is
properly seated in the groove in the hanger ball. If
using close-to-ceiling mounting, hang the fan on the
hook provided by utilizing one of the holes at the
outer rim of the ceiling canopy (C).
4
WARNING:
The hook is only to hold the fan while attaching
wiring. Failure to hang the fan properly by following these
instructions may result in the hook breaking, causing the
fan to fall. The hook must pass from inside to the outside
of the canopy.
Close to ceiling mount
Standard mount
A
JJ
JJ
NN
