HAMPTON BAY Antigua Plus Use And Care Manual Download Page 11

11

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Mounting the fan - standard

Mounting the fan close-to-ceiling

 

Align the locking slots of the ceiling canopy (C) with the two 
screws (II) in the mounting bracket (A). Push up to engage the 
slots, and turn clockwise to lock the canopy (C) in place.

 

Firmly tighten the two mounting screws (II).

 

Install the remaining two mounting screws (JJ) into the holes 
in the canopy (C) and tighten firmly.

 

Install the decorative canopy ring (KK) by aligning the ring’s 
slots with the screws in the canopy (C). Rotate the canopy 
ring (KK) clockwise to lock it in place.

7

WARNING:

 When using the standard ball/downrod mounting, the 

tab in the ring at the bottom of the mounting bracket must rest in 

the groove of the hanger ball. Failure to properly seat the tab in 

the groove could cause damage to the wiring.

WARNING:

 The locking slots of the ceiling canopy are provided only 

as an aid to mounting. Do not leave the fan assembly unattended 

until all four canopy screws are engaged and firmly tightened.

 

Carefully unhook the fan from the mounting bracket (A) and 
align the locking slots of the ceiling canopy (C) with the two 
screws (II) in the mounting bracket (A). Push up to engage 
the slots and turn clockwise to lock the canopy (C) in place. 
Immediately tighten the two mounting screws (II) firmly.

 

Install the remaining two mounting screws (JJ) into the holes 
in the canopy (C) and tighten firmly.

 

Install the decorative canopy ring (KK) by aligning the ring’s 
slots with the screws in the canopy (C). Rotate the canopy 
ring (KK) clockwise to lock it in place.

Assembly - Hanging the Fan (continued)

II

A

KK

JJ

C

D

E

B

II

A

KK

JJ

C

E

Summary of Contents for Antigua Plus

















Reviews: