HAMPTON BAY AG524I-ORB, Use And Care Manual

Page: 10 / 20

10
Assembly — Close-to-Ceiling Mounting
1 2
3
Assembling the Fan
Preparing the Motor Preparing the Canopy
□
Remove the mounting bracket (A) from the canopy (B)
by loosening the four canopy mounting screws with
lock washers (DD) on the top of the canopy (B).
Remove the two non-slotted canopy mounting screws
with lock washers (DD) and loosen the slotted canopy
mounting screws with lock washers (DD).
□
Remove the canopy bottom cover (C) from the canopy
(B) by turning the canopy bottom cover (C)
counter-clockwise.
□
Remove three of the six collar mounting screws with
lock washers (HH) (every other one) from the collar
on top of the fan motor assembly (E).
□
Make sure the slot openings are on top, then place
the canopy (B) over the collar at the top of the fan
motor assembly (E).
□
Align the mounting holes in the bottom of the canopy
(B) with the holes in the top of the fan motor assem-
bly (E), then fasten using the three collar mounting
screws with lock washers (HH) previously removed.
□
Tighten the collar mounting screws (HH) securely.
WARNING:
Failure to completely tighten the three collar
mounting screws (HH) could result in the fan becoming loose
and possibly falling.
B
E
HH
A
DD
DD
B
C
HH
E