HAMPTON BAY 855975 Owner'S Manual Download Page 12

11.Care of Your Fan

Here  are  some  suggestions  to  help  you 
maintain your fan

1.  Because  of  the  fan's  natural  movement, 
some connections may become loose.  Check 
the support connections, brackets, and blade 
attachments twice a year.  Make sure they are 
secure.    (It  is  not  necessary  to  remove  fan 
from ceiling.)

2.  C

  lean  your   fan  periodically  to  help

 

maintain  its  new  appearance  over  the  years.   
Use  only  a  soft  brush  or  lint-free  cloth  to 
avoid  scratching  the  finish.  The  plating  is 
s e a l e d   w i t h   a   l a c q u e r   t o   m i n i m i z e  

 

discoloration  or  tarnishing.   Do  not  use 
water when cleaning.  This could damage the 
motor,  or  the  wood,  or  possibly  cause  an 
electrical shock.

3.  You  can  apply  a  light  coat  of  furniture 
polish  to  the  wood  blades  for  additional 
protection  and  enhanced  beauty.  C

  over 

small  scratches  with  a  light  application  of 
shoe polish.

4.   There  is  no  need  to  oil  your  fan.  The 
motor has permanently lubricated bearings.

5.   If your fan is provided with glass shades, 
clean  with  lukewarm  soapy  water  and  a  soft 
cloth or sponge.

IMPORTANT

MAKE SURE THE POWER IS OFF AT THE 

ELECTRICAL PANEL BOX BEFORE YOU 

ATTEMPT ANY REPAIRS.  REFER TO 

THE  SECTION "MAKING ELECTRICAL 

CONNECTIONS”

DO  NOT  IMMERSE  GLASS  SHADES  IN  HOT 

WATER.  DO  NOT  PUT  GLASS  SHADES  INTO 
AN  AUTOMATIC DISHWASHER

.

WARNING : Make sure the power

  is off at the electrical panelbox

  Before you attempt any repairs.

   Refer to the section, “Making

       Electrical Connections”

THE HAMPTON BAY FAN&LIGHTING CO.

P.O.Box 395
Norco,CA 92860

Call toll free 1-800-527-0998

Summary of Contents for 855975















Reviews: