Page 19
AVERTISSEMENT:
1. Avant de commencer
à
installer ce luminaire ou d'enlever l'ancien luminaire,
d
é
connectez le courant en
é
teignant le disjoncteur ou en enlevant le fusible
correspondant du coffret
à
fusibles.
2. CONSULTER
UN
ELECTRICIEN
QUALIFIE
POUR
TOUTE
QUESTION RELATIVE A L'ELECTRICITE.
3. En cas de questions non relatives
à
l'
é
lectricit
é à
propos de ce luminaire,
veuillez contacter notre centre de Service
à
la Client
è
le au 1-877-527-0313
ou visiter www.homedepot.com. Veuillez indiquer votre UGS 766-782 ou
UPC 6940500312262.
4. Conserver votre re
ç
u et ces Instructions comme Preuve d'Achat.
OUTILS REQUIS POUR L'ASSEMBLAGE & L'INSTALLATION
(non inclus):
Lunettes de Protection
Echelle
Gants
D
é
nudeur de C
â
bles Electriques
Tournevis
à
T
ê
te Plate
Tournevis
à
Croisillon
Ruban Adh
é
sif Isolant
Pince pour C
â
bles Electriques
Page 6
PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
2ea Lock Nuts (#2)
3ea Wire Connectors (#11)
2ea Mounting Screws (#12)
1ea Ground Screw (#13)
1ea Cross Bar (#14)
2ea Outlet Box Screws (#15)
INSTALLATION INSTRUCTIONS:
1. Screw the two Mounting Screws (#12) into the Cross Bar (#14). Mount the Cross Bar (#14)
to the Outlet Box (#10) using the two Outlet Box Screws (#15). [Make sure the threads of
the Mounting Screws (#12) are facing outside when the Cross Bar (#14) is attached to the
Outlet Box (#10).]
2. Wrap the ground wire from the fixture around the Ground Screw (#13) on the Cross Bar
(#14), and then connect the ground wire from the fixture to the ground wire from the
Outlet Box (#10). Connect the white wire from the fixture to the white wire (neutral wire)
from the Outlet Box (#10). Connect the black wire from the fixture to the black wire (live
wire) from the Outlet Box (#10). Cover the three connections using the three Wire
Connectors (#11). Wrap the three wire connections with electrical tape for a more secure
connection. Position the wires back inside the Outlet Box (#10).
Note: If you have
electrical questions, consult your local electrical code for approved grounding methods.
3. Place the Canopy (#1) against the Outlet Box (#10) by aligning the protruding Mounting
Screws (#12) all the way through the holes on the Canopy (#1). Tighten the fixture to the
ceiling by screwing the two Lock Nuts (#2) onto the two protruding Mounting Screws
(#12).
4. Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn the light
switch on to activate the fixture.
