13 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Replacing the Gas Cylinder
WARNING:
Changing of the cylinder must be undertaken in a flame-free atmosphere. Ensure that all taps on the consuming appliance are
in the closed position.
1. Close the valve of the gas cylinder.
2. Disconnect the regulator from the cylinder following the instructions that came with your regulator.
3. Replace the cylinder.
4. In the absence of any flame, remove the plug or seal cap from the cylinder valve.
5. Check for the presence and good state of the gasket before connecting the regulator.
6. Perform a leak test using soapy water solution.
LP GAS SUPPLY CYLINDER SAFETY
The LP-gas supply cylinder must be:
□
Constructed and marked in accordance with the Specifications for LP-gas cylinders of the U.S. Department of Transportation
(DOT); or the Standard for Cylinders, Spheres and Tubes for Transportation of Dangerous Goods and Commission, CSA B339, as
applicable.
□
Provided with a listed overfilling prevention device.
□
Provided with a cylinder connection device compatible with the connection for the appliance.
Additional precautions:
□
Do not store a spare LP-gas cylinder under or near this appliance.
□
Never fill the cylinder beyond 80 percent full.
□
Place the dust cap on the cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the cylinder
valve that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane.
□
The cylinder used must include a collar to protect the cylinder valve.
HOSE AND REGULATOR USE AND REPLACEMENT
The pressure regulator and hose assembly supplied with the appliance must be used. Replacement pressure regulators and hose
assemblies must be those specified by the appliance manufacturer.
Storage
□
Always close the valve of the gas cylinder after use or in case of a disturbance.
□
Remove the pressure regulator and the hose attachment if the heater is not to be used for a period of time.
□
The cylinder must be stored outdoors in a well-ventilated area out of the reach of children.
□
A disconnected cylinder must have threaded valve plugs tightly installed and must not be stored in a garage or any other
enclosed area.
□
Storage of the heater indoors is permissible only if the cylinder is disconnected and removed from the heater.
□
Check the tightness of the gas valve and for damage. If you suspect you have a damaged gas valve, have it changed by your gas
dealer.
□
Never store liquid gas cylinder in a sub-terrain, or at places without adequate air ventilation.