Assembly (continued)
10
R
B
8
Attaching the netting panel
□
2
1
Unwrap the netting panels (R), open the zipper from one side and fully extend the netting panels. Check the location of ties on the netting panel
against the location of four rear posts (A).
Attach one plastic ring (II) at each hole on the netting panel. Find the numbered tags at each top corner of the netting panels. Starting at the
front inside left corner with the 1/2 panel, hang the netting panels accordingly going clockwise from the inside of the frame.
From inside the main frame, use plastic rings (II) to hang the netting panel onto the netting rail (2) which is higher than the tube (1).
Secure the netting panels to posts (A) with small ties (t2) through the slots on the back wall (P).
Secure the netting panels to posts (B) with small ties (t2) through the slots on the corner curtains (Q).
□
B
R
A
A
A
□
t1
t2
t1
t2
t3
P
II
