5.
Screws provided
by the outlet box
Hook
UL Listed
electrial
box
Figure 6
AC Wires
Washers
Hanger
bracket
Posts in the
outlet box
Figure 7
Hanger
bracket
Safety cable
C H A N G I N G T H E D O W N R O D
(OPTIONAL)
NOTE:
Your fan comes with a 4" downrod
attached to the hanger ball. In addition you
have been provided with a 6" downrod to use if
desired. If you choose to use the 6" downrod,
perform the following steps:
1. Remove the hanger ball from the 4"
downrod by loosening the set screw at the
top of the downrod which holds the hanger
ball to the downrod.
2. Slide the hanger ball down the downrod and
remove the support pin.
3. Insert the support pin in the holes at the top
of the 6" downrod and slide the hanger ball
up the 6" downrod. Make sure the support
pin is properly seated in the grooves in the
top of the hanger ball.
4. Tighten the set screw firmly.