Page 5
ASSEMBLY INSTRUCTIONS:
1. Begin assembly at the bottom of the lamp.
2. Insert lamp pole (B) into base (A) and turn clockwise to
tighten.
3. Insert lamp pole (C) into lamp pole (B) and turn
clockwise to tighten.
4. Repeat above step with poles D and E. Gently pull any
excess cord from point (H) so that the parts fit.
5. Attach shade (F) to the shadeholder cup by aligning the
open end of the recessed groove on the shade with the
securement bump of the shadeholder cup. Slide the shade
inside the cup and turn clockwise until it locks into place.
6. Install (3) 13W maximum CFL bulbs (included) or (3)
type A 60W maximum bulbs (not included).
Do not use 3-way bulbs or halogen bulbs in this fixture.
