13
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Assembly - Assembling the Fan Without the Light Kit
Assembling the fan without the
light kit
14
□
In order to use the fan without the light kit, remove the switch
cup cover from the top of the light kit tter assembly (E) by
removing the center hex nut inside the switch cup cover, and
then thread the switch cup cover off of the threaded nipple
on the top of the light kit fitter assembly (E). Remove three
screws.
□
Press the plastic plug (EE) (provided) into the center hole of the
switch cup cover.
□
Align the three scew holes in the switch cup cover with the
three key slots in the switch cup. Make sure the notch in the
switch cup cover clears the reversing switch in the switch cup.
□
Position the switch cup cover onto the switch cup and install
the three screws that were removed in first step.
□
Turn the switch cup cover clockwise until it locks and tighten
the three screws.
EE
