background image

52” Huntington III

Ceiling Fan by Hampton Bay

Quick-Install System

3-Speed Reverse Function for

Year-Round Comfort and Savings

Aero-Breeze™ Technology 

Moves up to 25% More Air

Tri-Mount Installation

QUESTIONS, PROBLEMS, MISSING PARTS:

Before returning to your local Home Depot, please call our

Customer Service Team at 1-877-527-0313 or visit www.homedepot.com.

Please reference your SKU (

519 694

 oil-rubbed bronze)

or UPC (82392 810528 oil-rubbed bronze).

Thank you for purchasing this Hampton Bay ceiling 

fan. This product has been manufactured with the 

highest standards of safety and quality. The finish 

of this fan is weather resistant, but over time will 

naturally weather and fade.

Safety Rules .................................. 1

Unpacking Your Fan .................... 2

Installing Your Fan ...................... 3

Operating Your Fan ..................... 11

Care of Your Fan .......................... 12

Troubleshooting ............................ 12

Specifications ................................ 13

Warranty Information ................. 14

Table of Contents

UL Model No. EF200DA-52

Summary of Contents for 52" Huntington III

















Reviews: