12
Assembly - Attaching the Light Kit
Attaching the light kit
Installing the light bulbs
12
13
□
Remove one screw (N) from the black bracket below the
fan-motor assembly (E). Loosen, but do not remove the
other two screws.
□
Connect the blue wire exiting the bottom of the fan-motor
assembly (E) with the black wire from the top of the light
kit fitter assembly (F).
□
Connect the white wire exiting the bottom of the fan-motor
assembly (E) with the white wire from the top of the light
kit fitter assembly (F).
□
Attach the light kit fitter (F) to the fan-motor assembly (E)
by securing them with the two screws (N) loosened in the
first step. Push the light kit fitter assembly (F) up to engage
the screw heads in the screw slots and turn to secure.
Tighten each screw firmly.
□
With the power off, install the light bulbs (L) (Max. 14W,
provided) into the light bulb sockets.
□
Place the glass bowl (J) into the light kit fitter assembly (F),
aligning the three flat areas on the top flange of the glass
bowl (J) with the three raised dimples in the light kit fitter
assembly (F). Turn the glass bowl (J) clockwise until it stops.
CAUTION:
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
WARNING: Do not overtighten when installing the glass shade
into the light kit assembly. Allow the glass shade to cool
completely before removing.
F
E
N
J
L
E
F
