background image

 

 

Maintenance 

 

 

Replacing the battery 

 

 

 

IMPORTANT

: Dispose of the battery in accordance 

with local, state, and federal regulations.

 

 

 

IMPORTANT

: When storing any solar product for an 

extended period of time, remove the batteries.  
Storing any solar product without regular recharge or 
removal of batteries could cause permanent damage 
to the rechargeable batteries.

 

 

 

NOTE

: Use one AA-size, 500mAh, 3.7V Lithium ion 

rechargeable battery. For best performance, replace 
with a lithium ion rechargeable battery annually.

 

 

  Hold the lamp housing (C) and rotate the top cap (A) 

counterclockwise until it is loose. Then, remove the top 
cap and glass shade assembly (A & B) from the lamp 
housing (C). 

  Hold the top cap (A) and rotate the glass shade (B) 

counterclockwise until it is loose. Then, remove the 
glass shade (B) from the top cap (A).  

  Remove the battery cover (G) and the old battery (F). 

Replace with a new Lithium ion rechargeable battery. 
The recommended replacement battery capacity 
should be 500 to 600mAh. 

  Replace the battery cover (G). Replace the top cap (A) 

and the glass shade (B) to the lamp housing (C).  

 

 

Care and Cleaning 

 

 

  The solar panel should be cleaned periodically with a damp cloth to help maintain optimum performance. 

  Do not use any cleaners with chemicals, solvents, or harsh abrasives. 

 

Troubleshooting 

 

 

Problem 

Possible Cause 

Solution 

The nightly run 
time is short. 

The battery is not fully charged. 

Ensure that the solar light is located in an area where 
it can receive the maximum amount of full, direct 
sunlight every day. Keeping the solar panel clean is 
equally important to ensure the maximum charging 
performance. 

The battery is reaching the end of its 
useful life. 

Replace the old battery with 3.7V Lithium ion 
rechargeable battery. 

The solar light 
does not turn on 
at night. 

The solar light is set to OFF. 

Your solar light is equipped with a 3-way selector 
(ON+PIR, OFF, PIR) on the back of top cap. The 
selector must be set to ON+PIR or PIR prior to use. 

The solar light is installed close to other 
light sources, which may keep the solar 
light from turning on at night 
automatically. 

Relocate the fixture or eliminate other light sources. 

 

Summary of Contents for 50180











Reviews: