11
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly - Attaching the Fan Blades
Assembly - Attaching the Light Kit
Attaching the light kit
Attaching the blades to the blade
bracket
11
9
□
Remove the three screws (QQ) on the switch cup cover of
the the light kit assembly (H).
□
Connect the wires exiting the bottom of switch cup with
the light kit assembly (H) by connecting the molded adaptor
connectors together.
□
Secure the light kit assembly (H) to the switch cup using the
three screws (QQ) that were removed in step 1.
□
Attach a blade (G) to a blade bracket (H) using the
screws (AA) provided. Please note that the rubber
washers are pre-attached to the blade bracket (H).
Insert a screw into the blade bracket (H). Repeat for the
two remaining screws (AA).
□
Tighten each screw securely.
CAUTION:
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
AA
G
F
E
H
Fasten the blade assembly to the
motor
10
□
Fasten the blade assemblies to the motor by inserting
the alignment post into the slot on the bottom of the
motor and tightening the blade bracket screws, please
note that the blade bracket screws are pre-installed into
the blade bracket.
□
Repeat this step for the remaining blades.
F
E
F
