HAMPTON BAY 407-669, Instruction Manual

Page: 6 / 24

Page 6
PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
2ea Wire Connectors (#8) 2ea Outlet Box Screws (#9) 1ea Mounting Strap (#10)
1ea Ground Screw (#11) 2ea Mounting Screws (#12)
INSTALLATION INSTRUCTIONS:
1.
Screw the two Mounting Screws (#12) into the Mounting Strap (#10). Mount the
Mounting Strap (#10) to the Outlet Box (#7) using the two Outlet Box Screws (#9).
[Make sure the heads of the Mounting Screws (#12) are facing outside when the
Mounting Strap (#10) is attached to the Outlet Box (#7).]
2.
Wrap the ground wire from the Outlet Box (#7) around the Ground Screw (#8) on the
Mounting Strap (#10). Connect the white wire from the fixture to the white wire (neutral
wire) from the Outlet Box (#7). Connect the black wire from the fixture to the black wire
(live wire) from the Outlet Box (#7). Cover the two connections using the two Wire
Connectors (#8). Wrap the two wire connections with electrical tape for a more secure
connection. Position the wires back inside the Outlet Box (#7).
Note: If you have
electrical questions, consult your local electrical code for approved grounding methods.
3.
Place the Canopy (#1) over the Outlet Box (#7). Allow the heads of the Mounting Screws
(#12) to come out through the large ends of the keyholes of the Canopy (#1). Twist the
Canopy (#1) clockwise until the heads of the Mounting
Screws (#12) slide into the
narrow ends of the keyholes. Tighten the Mounting Screws (#12) to secure the Canopy
(#1).
4.
Before completing Installation, please return to Assembly Instruction #3.
5.
Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn the
light switch on the wall or pull the Chain Switch (#4) on the fixture to activate the fixture.