Page 3
ASSEMBLY INSTRUCTIONS:
1.
UNSCREW THE SHADE FASTENER SLEEVE FROM THE SOCKET RING.
2.
THERE IS EXCESS ELECTRICAL CORD IN THE LAMP (TO ALLOW FOR
DISASSEMBLED DELIVERY). THIS EXCESS CORD SHOULD BE PUSHED INTO TOP
TUBE. THEN, PLACE SOCKET ASSEMBLY ON TOP OF TOP TUBE AND TIGHTEN.
3.
PULL WIRE FROM TOP TUBE THROUGH UPPER MIDDLE TUBE,
THEN MOUNT AND TIGHTEN TOP TUBE TO UPPER MIDDLE TUBE.
4.
MOUNT UPPER MIDDLE TUBE TO LOWER MIDDLE TUBE, AND PULL EXCESS
ELECTRICAL CORD THROUGH LOWER MIDDLE TUBE.
5.
MOUNT LOWER MIDDLE TUBE TO BOTTOM TUBE, AND PULL EXCESS
ELECTRICAL CORD THROUGH BOTTOM TUBE, AS ABOVE.
6.
PULL WIRE FROM BOTTOM TUBE THROUGH BASE, THEN MOUNT AND
TIGHTEN BOTTOM TUBE TO BASE.
7.
PLACE THE SHADE OF THE FLOOR LAMP ON TOP OF SOCKET ASSEMBLY.
TIGHTEN SHADE WITH THE SHADE FASTENER SLEEVE TO SOCKET RING
UNTIL SECURED.
BASE
BOTTOM TUBE
LOWER MIDDLE TUBE
UPPER MIDDLE TUBE
TOP TUBE
SHADE
SOCKET RING
SHADE FASTENER SLEEVE
SOCKET ASSEMBLY
