11
Attaching the light kit mounting
plate to the mounting ring
12
□
Remove one of the three light kit mounting plate
screws (HH) from the mounting ring (RR) and loosen
the other two screws. (Do not remove.)
□
Place the key holes in the light kit mounting plate (I)
over the two screws (HH) previously loosened from
the mounting ring (RR). Turn the light kit mounting
plate (I) until the light kit mounting plate (I) locks in
place at the narrow section of the key holes.
□
Securely tighten the two light kit mounting plate
screws (HH) previously loosened and the one (HH)
previously removed.
Assembly — Installing the Light Kit
I
RR
HH
F
Attaching the light kit to
the light kit mounting plate
CAUTION:
Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
13
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
I
SS
□
While holding the light kit (J) under the fan motor
assembly (F), snap together the wire connection
plugs (SS).
□
Carefully push all wires back into the switch housing.
Install the light kit (J) onto the light kit mounting plate
(I) with the three light kit mounting screws (II)
provided. Be sure to tighten all screws.
J
II
F
