Assembly (continued)
3
Attaching the Beam Center Cover and the Middle Inclined Beam Connectors to
the Assembled Long Side Beam
Attach the beam center cover (E) to the middle of assembled long side beam (C1&C2), then attach the middle inclined beam
Attach the middle inclined beam connector (F) to the long side left beam (C1) directly using M6x15 combination bolts (AA).
Attach the middle inclined beam connector (F) to the long side right beam (C2) directly using M6x15 combination bolts (AA).
Fully tighten the bolts using the hex wrench (JJ).
Repeat above steps for the other assembled long side beam (C1&C2).
NOTE:
The middle inclined beam connectors (F) should face the hole side of long side beam (C1&C2).
7
Please contact
1-855-HD-HAMPTON
for further assistance
HAMPTONBAY.COM
C2
C1
F
E
F
C1
AA
E
C2
E
e.
connector (F) to the beam center cover (E), align the hole and secure with M6x15 combination bolts (AA) as shown below.
