Assembly (continued)
6
Attaching the Triangular Support Pipe to the Assembled Short Side Beam
Attach the triangular support pipe (H) to the assembled short side beam (G1&G2) using M6x15 combination bolts (AA), as shown below.
Fully tighten the bolts using the hex wrench (JJ).
Repeat this step for the other triangular support pipe (H).
NOTE:
The triangular support (H) should insert from the side of the assembled short side
beam (G1&G2) without hole to the side with hole.
10
G1
H
G2
AA
Inside
H
G2
G1
