12
Assembly - Attaching the Light Kit
Attaching the light kit
1
□
Remove and save the three screws (QQ) from the light kit
fitter assembly (F).
□
Connect the wires exiting the bottom of the motor assembly (E)
by connecting the molded adaptor plugs together (blue to blue,
white to white).
□
Slide the light kit (F) into the switch housing and secure it using
the three screws (QQ) that were removed in the first step.
Installing the glass bowl
2
□
Remove the glass bowl holder (MM) from the threaded nipple
of the light kit fitter assembly (F).
□
With the power off, install the three LED bulbs (J) by screwing
them into the light bulb sockets.
□
Position the glass bowl (G) over the threaded nipple.
□
Install glass bowl holder (MM) to the threaded nipple to secure
the glass bowl (G) properly.
WARNING:
Allow the glass bowl to cool completely
before removing.
CAUTION:
Make sure the power is off before attaching
or removing the glass bowl.
CAUTION:
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing.
E
F
E
F
G
MM
J
