3
Preparing the motor
4
Assembling the fan
Assembly
9
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
FF
HHHH
GG
□
Remove the cotter pin (GG) and clevis pin (FF), and
loosen the two collar setscrews (HH) from the motor
collar.
□
Route the wires exiting from the top of the fan motor
assembly (G) through the coupling cover (F). Ensure
the slot openings are on top.
□
Route the wires through the canopy bottom cover (C),
canopy (B) and then through the hanger ball/downrod
assembly (D).
□
Align the holes at the bottom of the hanger
ball/downrod assembly (D) with the holes in the collar
on top of the fan motor assembly (G). Carefully insert
the clevis pin (FF) through the holes in the collar and
the hanger ball/downrod assembly (D). Be careful not
to jam the clevis pin (FF) against the wiring inside the
hanger ball/downrod assembly (D).
□
Insert the cotter pin (GG) through the hole near the
end of the clevis pin (FF) until it snaps into the locked
position.
□
T
ighten the two collar setscrews (HH) on top of the
fan motor
assembly (G) firmly.
WARNING:
Failure to properly install the cotter pin (
GG)
could result in the fan becoming loose and possibly falling
.
D
B
F
C
G
GG
FF
HH
HH
