1
Preparing the canopy
2
Changing the downrod (Optional)
BB
A
B
C
BB
Assembly
8
□
Remove the canopy bottom cover (C) from the canopy
(B) by turning the canopy bottom cover (C) counter-
clockwise.
□
Remove the mounting bracket (A) from the canopy (B)
by removing the non-slotted mounting bracket screw
(BB) from the bottom of the canopy (B) and loosening
the slotted mounting bracket screw (BB) a half turn
from the screw head. Next, turn the canopy (B)
counterclockwise to remove the mounting bracket (A)
from the canopy (B).
VV
PP
UU
E
□
Remove the hanger ball
(UU)
from the 4" downrod
(VV)
by loosening the setscrew
(QQ)
at the top of the 4"
downrod
(VV)
which holds the hanger ball
(UU)
to the
4" downrod
(VV)
.
□
Slide the hanger ball
(UU)
down the 4" downrod
(VV)
and remove the cross pin
(PP)
.
□
Insert the cross pin
(PP)
in the holes at the top of the
6" downrod (E) and slide the hanger ball (UU) up the
6" downrod (E). Make sure the cross pin
(PP)
is
properly seated in the grooves in the top of the
hanger ball (UU).
□
Tighten the setscrew
(QQ)
firmly.
NOTE:
Your fan comes with a 4" downrod (VV) attached to
the hanger ball (UU). In addition you have been provided with
a 6" downrod (E) to use if desired. If you choose to use the 6"
downrod (E), perform the following steps.
