INSTALLATION:
1.
Select a table or desk edge location on which the fixture will be installed. Be sure
that a 110/120 V wall receptacle is within reach of the
fixture’s polarized plug.
2.
Squeeze open the
fixture’s CLAMP and close the CLAMP over desired location.
3.
Connect the POLARIZED PLUG to a standard 110/120 V wall receptacle.
4.
Screw the provided LED BULB into
lamp’s socket.
OPERATION:
1.
To turn the light ON, turn the switch knob, located on the back of the lampshade,
clockwise. To turn it OFF, turn the switch knob clockwise.
TABLE
CLIP
SWITCH
KNOB
LED
BULB
