Hampshire Controls Corporation
20 Mar. 2021
MPS Operating Manual
Page 8
Alarm Limits and Min/Max Readings
To view the low and high alarm limits tap the DOWN ARROW. To view the minimum and
maximum readings (since last power-up or reset) tap the UP ARROW.
To manually reset the Min/Max readings, while the Min/Max readings are shown on the display,
tap the TEST/RESET button. You will be asked to repeat TEST/RESET to confirm.
System Configuration
Setting Alarm Limits
To configure the system’s alarm parameters
press the MUTE/MENU button while the
display is showing the probe readings. The
display will show the first parameter
1 Low
.
Use the STEP button to go to the next
parameter, or the TEST/RESET button to go to
the previous parameter.
To change the currently displayed parameter,
use the UP and DOWN arrow buttons. The value is given in the units configured for the probe
being edited (i.e. °F, °C, %RH).
While in the
Edit Limits
menu, the STEP button will advance through
Low
and
High
limits for each probe.
Continue to the
Edit Times
menu by pressing the MUTE/MENU button once, or return to
the sensor readings by pressing the MUTE/MENU button twice.
